Equipped With |
Specifications: With Payoff & Spooler
- Number of Blocks: 7
- Built in Elongation: Yes
- Angled Blocks: Yes
- Diameter of Blocks: 18" (450mm)
- Soap Box: One Each Stand W/Die Holder
- Dancer Arm: One Each Stand
- Inlet Wire Diameter: .120" (3.07mm)
- Finishing Wire Diameter: .046" (1.18mm)
- Maximum Speed: 4100 FPM (1250mm)
- Cooling: Internal Water Cooled Capstans and Dies
- Capstan Water Pressure: 40 L/MIN @Pressure of 100kPa
- Die Water Pressure: 15 L/MIN per Die @ A Pressure of 100 kPa
- Dust Extraction
- Directly behind the Drawing Dies: 1 X 37.5 Cubic Meters/H
- Entrance of Each Soap Box: 1 X 37.5 Cubic Meters/H
- Wire Straightener: 2 X 90 Cubic Meters/H
- Motors: Ind. AC Motor W/Frequency Control on each Block
- Motor Power: 30 HP (22kW)
- Power Supply: 415V/50Hz
- PLC: Remote PLC
- Spooler
- Model: OBX
- Type: Conical Reel WS2000
- Take-Up Speed: 1800M/Min
- Reel Dimension: 47" (1200mm) outside Dia x 31" (812mm) Core Diameter
- Take-up Pitch: .47" (12mm)
- Drive Motor Reel: 64 HP (48.2 kW) DC 1648/2350 RPM
- Drive Motor Wire Guide: 1 HP (0.75 Kw) 2000 RPM Brake
- Compressed Air Connection: 6 Bar (85 PSI)
- Controls: Touch Panel PLC
**All specifications are subject to verification by purchaser**
|
|